Hats

Suie Roberts asked:


You will need…

Some pieces of felt, embroidery thread, and a print out of the pattern pieces. Which can be printed out freely at the SantasPostbag website.

Cut out the pattern pieces from the printed out sheet. Place the pattern pieces on the felt and pin into place. Put the pieces around the edge of the felt and close up next to each other because this saves fabric. Cut around the pattern pieces, there is no need to leave a seam allowance, cut right up to the patter.

Each pattern piece says on it what part of the hat it is and how many you need to cut.

Use embroidery thread to sew your hat together. Embroidery thread is usually made up of six strands. Split the thread so that you only use three strands to sew with.

Get the two top hat pieces and prepare to sew the circle to the top edge of the shaped top hat piece. Use blanket stitch to sew the hat together. Curl the shaped piece around to follow the circle piece. You may find that the two ends of the shaped piece overlap at the end. Trim the ends so that they meet nicely and over sew them together.

The top part of the hat now needs to be sewn to the brim of the hat. The top part sits over the hole in the hat brim. The blanket stitch will show on the inside here.

The two inner discs need to be sandwiched between the top part of the hat and the base of the hat. The inner discs are slightly smaller and need to be placed off centre so that the edge touches the back of the needle case; this will be the hinged area.

Attach the threat to the left-had side of the hinged area and blanket stitch 3cm through all four layers.

After the hinged area, keep the thread attached to the hat. Edge the brim of the hat with blanket stitch.

Re-join the thread to the base of the hat at the left-hand side of the hinged area and edge the base with blanket stitch.

Cut out some flower shapes in contrasting felt. Tack the flowers to the hat with a couple of stitches, to finish off the hat.



CEDRIC

Tony Rush asked:


It’s ok.

Really. You’re not alone. There are thousands more people like you. And me.

You want Indiana Jones’ hat.

You don’t have any reason except…well, you want one. If you lived 75 years ago, it wouldn’t even be a question: of course you’d own a hat. And you’d feel ***** if you left the house without it.

After all, just look at it! The sharp brim. The distinctive shape. The flavor of class and dignity that comes with that 1930s style.

Ah, the fedora!

But, in an age of superstores, low prices and lower quality, where does one acquire such a thing of beauty?

For me, the answer was obvious: why not contact the man who made Harrison Ford’s hat? Marc Kitter, along with his partner Steve Delk, hand-made all the fedoras used in the latest Indiana Jones film, “Indiana Jones and the Kingdom of the Crystal Skull”.

Bernie Pollack, costume designer for “Indiana Jones and the Kingdom of the Crystal Skull” contacted Kitter. “He’d been told that that Steve and I had specialized ourselves on the Indy fedora and wanted to know if we could answer some questions. After quizzing us on brim widths, crown heights, ribbon width, fur quality and many other details, Pollack asked us for some samples. We sent in several sample hats and could do nothing but wait.”

According to Pollack, Spielberg had been worried. “Ah, I’m so relieved he [Spielberg] said. I lost sleep wondering if you would be able to come up with the perfect hat.”

Kitter said, “But, after a test shooting with Harrison Ford and Steven Spielberg, the dream came true and we got the order. My wife went on vacation and we started making hats up to 18 hours a day.”

Eighteen hours a day? If that sounds like a lot, it helps to know what goes into making a real Indiana Jones fedora. The best fedoras are made from fur-felt, never wool. In fact, the highest quality fedora is made from beaver.

It’s a long and difficult process. The fur is manipulated, treated and transformed into actual “felt”, arguably the toughest fabric known to man. (The fibers are interlocked and arranged in every possible direction making it almost impossible to tear.)

“The pure beaver felt used on my hats are specially made to my specs from a traditional manufacturer. This is the highest density felt I’ve ever worked with; and that adds to the durability of the final hat. We even add water-repellant to the felt during the manufacturing process.”

From there, the best fedoras are hand-crafted over a wooden block. “Wooden hat blocks have the advantage of letting the felt “breath” while it dries on them. This is one of the many details that isn’t always visible but prove valuable in the long haul.”

Ironically, one of the most important pieces of a high-quality fedora might be something that you rarely see: the sweatband. Since this is the only part of the hat that actually touches the wearer’s head, having the right material ensures comfort and durability.

Kitter’s hats use exclusive sweatbands made from kangeroo hide; the hides are traditionally tanned by a family-owned company in Australia. From there, they’re cut and turned into the most shrink resistant leather sweatbands available, known and loved by customers all over the world.

The finishing touch is the lining of the hat made from the highest quality bridal satin. “It looks and feels like silk but it’s more resistant to dust and sweat.”

The whole process can take more than 14 hours by hand and it shows.

So…what makes the Indiana Jones hat so unique?

“The Indy Fedora is a classic brown snap brim Fedora with a contrasting dark brown ribbon, but the — as is always the case with quality — the devil is in the details,” said Kitter.

“The blockshape used for the Indy Fedora is very uncommon nowadays. Today most classic hats have a tapered crown and are made from lightweight felt, mainly pure rabbit or rabbit beaver blends.

But, even if you never have to worry about wearing your fedora through the jungles of South America or racing the Russians for an ancient artifact, you still deserve a hat that will survive normal living.

“A high-quality fedora should be able to protect you from the elements, not the other way around. The hat should withstand heavy downpours, hot and humid summer days, snow….but it should do it with style. So, you’ll be able to wear the same hat to the restaurant at night,” Kitter says.

In other words, an authentic Indy fedora will get you positive feedback on a luxury cruise due to its velvet-like silky surface…but it’s just as appropriate with jeans and work-boots.

So, whether you’re looking for that final touch of class to go with a great suit and tie or you’re excavating the garden to make room for the begonias, the classic Indiana Jones fedora is the perfect addition to your wardrobe.

And yes, mine’s on the way.



DAREN